infrared: IR

Infrared is an electromagnetic wave with a wavelength of 1,000 μm to 0.75 μm appearing outside the red light of the visible light in the solar spectrum. Infrared is invisible and has longer wavelengths than visible rays and have properties that are absorbed by objects and changed into heat energy.

iR array thermometer

1. iR array thermometer can measure 64 points without contact.
2. One sensor can measure a wider area.
3. Ambient temperature display
4. Emissivity(Σ) is adjustable: 0.101 ~ 0.99(default: 0.95)
5. Temperature measurement range: -50°C~350°C

Unlike the contact thermometer, iR array thermometer does not have to wait for thermal equilibrium, so it has a faster temperature detection rate.

1. moving, rotating, vibrating objects
2. Object in a strong electromagnetic field (ex. High-frequency heating)
3. Object in rapid changes of temperature.(100msec unit)
4. Object in a vacuum chamber
5. Super-temperature object that cannot be measured by a contact thermometer
6. Objects that may be damaged or contaminated in contact
7. Objects with changing temperature distribution
8. Objects that may be changed temperature in contact
9. Objects that have a low thermal-conductivity
10. if frequent temperature measurements are required at the site

Feature

1. UV Tron using Photovoltaic Effect and Metal Gas Amplification
2. Response range: 195~260㎚
3. Stability time: Approx. 25ms
4. Sensitivity adjustable: 1~10Steps

Electric Panel Configuration

SCADA System Interlink Configuration
Support Modbus Protocol

Patent registration product

1. HDC array thermometer can measure 64 points without contact unlike tpoint temperature measurements.
2. HDC array thermometer has a wide FOV and measures the surface temperature of an object and the ambient temperature together.
3. Emissivity(Σ) is adjustable: 0.101 ~ 0.99(default: 0.95)
4. Using the Parameter Setting Tool, you can set up various settings and monitor them.(RS-485)
5. Various FOVs available

Specification

HDC array thermometer Specification

Model No.	HDC164-1505-XX(Circle type)   HDC164-1603-XX(Square type)
General	* Size:   Circle type: Ø32x120   Square type: 60(89)Wx60Hx50D   * Supply Voltage: DC 5V
Specification	* 64points(16x4)   * Range: -50 ~ 350℃   * Emmissivity: 0.10 ~ 1.00   * Output Interface: RS-485   * PTAT type   * Resolution: 0.1℃   * Response rates: 0.2sec   * FOV: 40°, 60°, 120°
Function	* light and simple to assemble   * Use Interface Connector   * RS-485 Communication

Patent registration product

1. Side-on type using Photovoltaic Effect and Metal Gas Amplification
2. Sensitivity to infrared: only
3. Adopting sensors with high sensitivity and wide visibility
4. Sensitivity adjustable: 1~10Steps
5. Easy installation with adjustable angles

Specification

Spark + Flame Detector Specification

Model No.	RaSFD-UV1507
General	* Size: 80Wx80Hx50D   * Supply Voltage: DC 5V ~ 15V
Specification	* Special Response: 185 ~ 260nm   * Window Material: UV Glas   * Output Signal: Open Collector   * Output Interface: RS-485   * Quenching Time: Approx. 25ms
Function	* 10step Sensitivity   * Electric Spark Detector   * 1 Spark Detector LED Display   * Interworking with Integrated Fire Detector